Product introduction
Product parameters
1．Description
WSD series male, including two 8# Pin, six Φ1mm Pin and a male insulator and a sealing ring and a
sleeve and metal latch parts. The connector and cable are over-moulded together.
2．Characteristic
2.1 Electrical Performance
Rated Current : 40A- 8# Pin ; 2A- Φ1mm Pin
Insulation Resistance : ≥20MΩ/ 500V DC/ 3s
Withstand Voltage : 500V AC/ 2mA/ Within 60s
2.2 Mechanical Performance
Cycle Life：5000 times
Collapsing strength of buckle：No less than 300N
2.3 Material and plating
2.3.1 Contactor
Part Material : Copper alloy
Production Process : Machining or mould
Plating : Sliver/gold
2.3.2 Male Insulator
Shell Material : 30% glass fiber reinforced of PBT
Production Process : moulding
2.4 Working Circumstance
Working temperature : -30℃～+80℃
Fire Retardant Level : UL94 V-0 (Cable :VW-1)
Salt Spray : 72h
IP Rating : IP67
WINSENDA can be provided to you:
We have professional technical team,As a manufacturer and supplier of reliable cables and custom wires and connectors, our factory is located in Guangdong, China, with production facilities in Shenzhen and Dongguan, Guangdong, with a total production area of 9,000 square meters
Professional equipment
We manufacture a wide range of cables in China for various automotiveproducts. Power adapters and industrial equipment
ODM & OEM
Our flexible custom cable designs and manufacturing capabilities in ourChina factory allow us to meet the needs of a wide range of customersand provide the customization you need
Service is 24 housavailable
Provide you with a system of pre-sales, sales and after-sales services
Certificate of Honor
Adhering to the business principle of mutual benefits, we have had a reliable reputation among our customers because of our professional services, quality products and competitive prices.
Applications
We welcome customers at home and abroad to visit our factory to reach long-term cooperation and create success together.
Medical field
RD field
3C field of consumer electronics
Communication technology field
Automobile manufacturing
Industrial control field
FAQ
Network cables, usually made of metal or glass, are used to carry information within a network. There are three common types of network cables: twisted pair, coaxial, and fiber optic (optical). A twisted pair is a data transmission line composed of many pairs of wires. It is characterized by low price, so it is widely used. Twisted pair is used to connect with RJ45 crystal head, there are two kinds of STP and UTP, and UTP is commonly used.
Male-female butt terminal wires may fail due to various reasons during operation. Common faults include poor contact of the connector, short circuit between wires, open circuit, grounding, etc. So, what are the reasons for the terminal line failure?
In life, most people don't know much about the information about terminal wires. This is not surprising, because some terminal lines and electronic equipment are integrated! Just like the video cable in the TV, it is basically connected with the TV. Many people turn off the power directly when they don't watch TV, and the video cable will not be touched at all. If it is a good-quality product, there are few failures, and there is not much contact with it, so many people don't know much about these products.
Clarify a series of characteristics of the customer's demand products, such as conductor size, conductor type, insulation material, P position, length and other specifications, terminal wire manufacturers need to design and produce according to the corresponding needs.
Use the cutting edge of the wire crimping pliers to cut the thread ends evenly, and then put the thread ends into the stripping knife edge, let the thread ends touch the baffle, hold the crimping pliers slightly and rotate slowly, and use the knife edge to cut the protective rubber of the twisted pair , pull off the rubber.
The competitiveness of domestic connector products depends to a certain extent on the level of manufacturing technology. Continuous development of new manufacturing technology and improvement of existing production and processing technology can greatly improve product manufacturing efficiency and quality assurance capabilities.
20A/40A E-Bike Change Cable Assembly
Product Model：
Categories：
Keywords：
Download File：
RELATED PRODUCTS
Online Message
Ready to grow your business? Your next great business opportunity starts with an inquiry.
Winsenda
Making The Perfect Connection
Shenzhen WSD Factory
Tel : 0086-755-27555389
Fax : 0086-755-27732285
E-mail : c.s@winsenda.com
Address : 4/F, E Building , Chengdexuan Technology Park, 2rd Ind, Zone,Lisonglang ,Gongming Town, Guangming District, Shenzhen City.CN
Dongguan JSK Factory
Tel : 0086-769-82303618
Fax : 0086-769-82301018
E-mail : c.s@winsenda.com
Address : No. 17, Jingfu Road, Xincheng Industrial Zone, Hengli Town, Dongguan City
Hong Kong Office
Contact: Mr. Gao
Tel: 852-95655507
Fax: 852-30506713
E-mail: sales@winsenda.com
Address: ROOM 05 28/F HO KING COMMERCIAL CTR 2-16 FA YUEN STREET MONGKOK KL
Copyright 2022 winsenda (HongKong)co.limited [administrator]
MESSAGE