-
-
Products
-
28
2023
-
02
Do you know the steps of 1.25 terminal wire processing
Clarify a series of characteristics of the customer's demand products, such as conductor size, conductor type, insulation material, P position, length and other specifications, terminal wire manufacturers need to design and produce according to the corresponding needs.
Author:
1. Model specification parameters of electronic wiring harness
Clarify a series of characteristics of the customer's demand products, such as conductor size, conductor type, insulation material, P position, length and other specifications, terminal wire manufacturers need to design and produce according to the corresponding needs.
2. Crimp connector
Crimp connectors, primarily used to terminate wiring harnesses from both sides, are as important as the wires inside them. During terminal wire design, terminal wire manufacturers need to accurately measure the wire length required by the specification. Once the electronic wire is cut to a limited length, other considerations need to be verified, such as the length between contacts and the length between the connector and the wire end. Between the length requirements, tests such as pull tests and continuity tests are also required to ensure that the wires and connectors are firmly put together.
1. Model specification parameters of electronic wiring harness
Clarify a series of characteristics of the customer's demand products, such as conductor size, conductor type, insulation material, P position, length and other specifications, terminal wire manufacturers need to design and produce according to the corresponding needs.
2. Crimp connector
Crimp connectors, primarily used to terminate wiring harnesses from both sides, are as important as the wires inside them. During terminal wire design, terminal wire manufacturers need to accurately measure the wire length required by the specification. Once the electronic wire is cut to a limited length, other considerations need to be verified, such as the length between contacts and the length between the connector and the wire end. Between the length requirements, tests such as pull tests and continuity tests are also required to ensure that the wires and connectors are firmly put together.
Key words:
Related news
Winsenda
Making The Perfect Connection
Shenzhen WSD Factory
Tel : 0086-755-27555389
Fax : 0086-755-27732285
E-mail : c.s@winsenda.com
Address : 4/F, E Building , Chengdexuan Technology Park, 2rd Ind, Zone,Lisonglang ,Gongming Town, Guangming District, Shenzhen City.CN
Dongguan JSK Factory
Tel : 0086-769-82303618
Fax : 0086-769-82301018
E-mail : c.s@winsenda.com
Address : No. 17, Jingfu Road, Xincheng Industrial Zone, Hengli Town, Dongguan City
Hong Kong Office
Contact: Mr. Gao
Tel: 852-39625213
Fax: 852-30506713
E-mail: sales@winsenda.com
Address: ROOM 05 28/F HO KING COMMERCIAL CTR 2-16 FA YUEN STREET MONGKOK KL
Copyright 2022 winsenda (HongKong)co.limited [administrator]
MESSAGE